1. Select a driver in the Please select a driver section from the following choices:

   • DirectSound

   • ASIO

   • WASAPI

2. Select an output device in the Please select an output device section.

   Note
   The output device list is different per driver.

3. Select a sample rate in the Please select a mixer sample rate section. If you don't know what to select, leave the default value.

4. Test the audio configuration by clicking on the Test audio settings button.

5. Select an audio file to play and click on the OK button.

6. If the audio configuration is correct, you should hear the audio file play normally. If the configuration has a problem, the error will be shown.

7. Click on the Save settings and continue button to save the audio configuration and launch the application.

The audio configuration has been tested successfully and the application can launch normally.